Fusil de asalto airsoft LCT MRK-VAL
- Nombre del fabricante / marca: LCT
- Color: Negro
- Longitud del producto [cm]: 91
- Peso del producto [g]: 3490
- Material: Acero
- Velocidad de salida [FPS].: 400
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
La carabina de asalto LCT MRK-VAL ASG
Una versión modificada de la conocida réplicas AS VAL fabricada por LCT. El modelo anterior está equipado con una guía de petaca tipo AR15 junto con una petaca SF.
La base de la réplicas es la AS VAL. El VAL fabricado por LCT se caracteriza por su mano de obra torpe con materiales de primera calidad. La réplicas utiliza principalmente, acero ennegrecido del que están hechos la mayoría de los componentes de la réplicas. Para la empuñadura de la pistola, la culata, el cargador y la báscula se utiliza plástico de alta calidad. Se utilizó una aleación de aluminanio para fabricar la guía de la petaca y el "cañón propiamente dicho" ficticio. c
Además de la impecable mano de obra, ajuste casi perfecto y materiales de alta calidad a los que LCT acostumbra, la réplicas presume de muy alta cultura de funcionaminaento y vida útil de los componentes internos.
En el interior encontrará un motor de alto rendiminaento, pistón con garras de metal, piñones reforzados 18:1 montados sobre rodaminaentos de bolas de 9 mm y conjunto de cilindro sellado. El conjunto del cilindro consta de una cabeza de pistón con cojinetes de aluminanio, una culata de doble sellado, un cilindro cromado y una nozzle de plástico sellada. Además, el bastidor está equipado con un muelle de cambio rápido.
Características de la réplicas:
- Construcción duradera
- Aspecto único
- Capaz de utilizar la mayoría de petacas estándar AR-15
- Elección de materiales de primera clase.Acero oxidado en caliente de alta resistencia a la corrosión< yPlástico de alta calidad
- Muy buenos componentes internos< que garantizan un funcionaminaento duradero y sin problemas o un fácil ajuste de la potencia
- Diseño único
- Montado para óptica de cola de minalano oriental
El paquete incluye:
- Low-Cap Cargador
- Réplica
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).