JG WORKS airsoft fusil JG0738 gen 2 Tan
- Nombre del fabricante / marca: JG
- Color: Tan
- Longitud del producto [cm]: 87
- Peso del producto [g]: 2800
- Material: Aluminio, Acero, Polímero
- Velocidad de salida [FPS].: 360
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
JG WORKS JG0738 fusil airsoft gen 2
La carabina, al igual que la original inflamable, está fabricada predominantemente en plástico ligero y duradero. El metal se utiliza para el cañón exterior, el supresor de llamas, el conjunto de dispositivos mecánicos de puntería y el raíl RIS inferior con clip para el cinturón. La carcasa de la corredera es de acero. El diseño general está excepcionalmente bien ajustado y equilibrado, y la gran maniobrabilidad se ve reforzada por el uso de una cabeza de cilindro de plegado lateral. La petaca está provista de un pie de goma blanda para mayor comodidad.
En la parte trasera y en la parte inferior de la empuñadura delantera, hay raíles de montaje unired dotsales RIS de 22 mm, que permiten equipar la fusil con toda una gama de accesorios adicionales. El conjunto está fabricado en un sistema modular, que permite sustituir fácilmente, por ejemplo, el alojamiento del cargador por un adaptador al estándar M4/M16. La batería está situada en el interior de la empuñadura delantera, su extracción se realiza en pocos segundos y requiere la retirada de un único pasador de montaje. Tanto la empuñadura de recarga como el selector de modo de disparo son de doble cara, lo que garantiza un manejo cómodo tanto para diestros como para zurdos.
La réplica cuenta con un sistema de muelles de cambio rápido. El acceso al sistema QSC es extremadamente sencillo: basta con abatir la cabeza de cilindro para poder extraer el muelle junto con la corredera.
También en el interior, la réplica se ha fabricado con sumo cuidado. La construcción se basa en la fiable gearbox v.3, que utiliza engranajes de acero reforzado y una cabeza de pistón direccional, lo que afecta significativamente a la eficacia de la réplica. La gearbox de la última red dotsión también está equipada con cojinetes de deslizamiento de acero de 7 mm.
La réplica se suministra con un cargador de plástico tipo hi-cap con una capacidad de 470 perdigones. Está equipado con ganchos, lo que permite conectar varios cargadores entre sí.
El paquete incluye:
- Varilla de limpieza
- Instrucción
- Cargador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).