- Material: Metal + polímero Peso: 2760 g Color: Negro Longitud: 740 - 835 mm Velocidad de salida: ~ 410 FPS Motor: Eléctrico Fabricante: G&G
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica de carabina GC18 MOD1 - negra
La réplica está hecha de metal y polímero reforzado con fibra de vidrio. La réplica ha quedado perfectamente encajada. El cuerpo, la empuñadura delantera, el cañón externo, la guía de la culata, los dispositivos de puntería y la mayoría de las piezas pequeñas son de metal. Por otro lado, la culata y la empuñadura de la pistola son de polímero.
La réplica tiene una culata telescópica con espacio para una batería. La culata es regulable, por lo que se puede ajustar la longitud de la carabina según las preferencias del tirador. La empuñadura de la pistola ha sido perfilada para proporcionar el mejor ajuste posible en la mano. El cañón está acabado con una rosca izquierda de 14 mm.
Además de las piezas de alta calidad típicas de G&G, la GB tiene instalado un innovador sistema ETU (Electronic Trigger Unit). El sistema reemplaza completamente el cubo del conector y asume totalmente la función de un módulo MOSFET. La acción del gatillo electrónico ha dado al sistema una excelente respuesta de disparo. Cada vez que se pulsa el gatillo se produce un ciclo completo de GB.
El sistema ETU ofrece la posibilidad de seleccionar diferentes modos de disparo programables. El usuario de base tiene acceso a los modos SAFE - SEMI - y la posibilidad de elegir entre FULL AUTO o ráfaga de 3 disparos. El proceso de programación es muy simple: basta con poner el selector en la posición SEMI y apretar el gatillo pulsado durante 10 segundos. Después de este procedimiento, la tercera opción del selector de modo de fuego iniciará el modo seleccionado.
El set no incluye batería y ni cargador de batería.
El set incluye:
- cargador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).




















