Darmowa dostawa desde 24,79 €
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Réplica de fusil JG1601MG
Kod modelu wytwórcy 1601MG
nethansaTAK
WYSYŁKA INPOSTNo

Réplica de fusil JG1601MG

  • Nombre del fabricante / marca: JG
  • Color: Negro
  • Peso del producto [g]: 4500
  • Material: Metal, Polímero
  • Velocidad de salida [FPS].: 360

190,27 €

bruto / 1pcs
Najniższa cena produktu w okresie 30 dni przed wprowadzeniem obniżki: / pcs
Precio regular: / pcs
Precio de catálogo:190,27 €
Możesz kupić za ptos.
de
Producto en stock en una cantidad muy grande.
Skontaktuj się z obsługą sklepu, aby oszacować czas przygotowania tego produktu do wysyłki.
Producto en stock en una cantidad muy grande.
Envío
14 dni na darmowy zwrot
Bezpieczne zakupy
Después de la compra recibirás ptos.

The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.


The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.


The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.


The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.


The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.

Réplica del fusil JG1601MG

Esta réplica del fusil de asalto, que fue el armamento estándar del ejército estadounidense durante la guerra de Vietnam, se fabricó con piezas metálicas y plástico. Los revestimientos exteriores del cañón, el compartimento de la batería, la cabeza de cilindro, la empuñadura y el cañón eran de plástico. El cañón exterior y la gearbox eran de metal. El alojamiento del cargador corto, a menudo denominado "vietnamita" de alta capacidad (190 cartuchos), también es metálico.

El cañón largo (510 mm) garantiza un disparo de alta precisión, lo que, combinado con una velocidad de descarga inicial de ~360 FPS, hace de esta réplica un arma de precisión, perfectamente adecuada tanto para el soldado de asalto de primera línea como para el tirador de precisión. El cañón está terminado con una rosca izquierda de 14 mm que permite acoplarle un silenciador. La empuñadura delantera, así como la de transporte, son típicas de la red dotsión A1 del fusil.

La réplica cuenta con un carcasa de gearbox reforzado y una guía de muelle metálica, así como engranajes de acero con ocho trinquetes antirblow-back y un piñón de motor con cojinetes. Las piezas JG son conocidas por su durabilidad y resistencia al desgaste natural, lo que mejora significativamente la vida útil de la réplica, además de reducir el coste de una posible puesta a punto. También hay que mencionar que la réplica está equipada con un motor Hi-Torque, un cilindro cromado y una cabeza de pistón direccional, lo que afecta significativamente a su rendimiento y eficiencia.

El kit incluye:
- réplica
- cargador
Marka
Symbol
JGW-01-004398
Kod producenta
5902543005564
Batería recargable incluidaWięcej

NiCd rechargeable battery is characterized by high efficiency current-carrying capacity, but there are disruptive effect on memory. Should be unloaded and loaded in the full cycle, ie, it is recommended to fully discharge, and after unloading must charge the battery immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the life - on the other hand, they earn about 30% more capacity.

No
Blow BackWięcej

Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.

No
Color
Negro
Longitud del producto [cm]
99.50
Peso del producto [g]
4500
Propulsión
Accionamiento eléctrico
Dystrybutor Odpowiedzialny w UE
GF CORP Sp. Z o.o. Sp.k. ul. Jana Długosza 42-46 51-162 Wrocław Polska info@gfcorp.pl
Velocidad de salida [FPS]Więcej

It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

360
Modo de disparo
Modo automático
Modo semiautomático
Versión del gearboxWięcej

Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.

Gearbox v2
Hop-UpWięcej

Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).

Si
Longitud interna del cañón [mm]
509
Longitud mínima [mm]
995
Capacidad del cargador de munición [pcs]
190
MOSFET/ETU
No
Producent odpowiedzialny w UE
JGW-Fujian Fuxing Industry Paintball Marker Co.,Ltd, Longqiu Industrial Park Zhang-zhou City; 0 Shiting Town, 0
Sistema de cambio rápido de muelle
Si
Tipo de enchufe
tamiya pequeña
Potrzebujesz pomocy? Masz pytania?Zadaj pytanie a my odpowiemy niezwłocznie, najciekawsze pytania i odpowiedzi publikując dla innych.
Zapytaj o produkt
Si esta descripción no te resulta suficiente, envíanos tu pregunta acerca de este producto. Intentaremos responder a la mayor brevedad posible. El tratamiento de los datos se realiza de conformidad con la política de privacidad. Al facilitarlos, aceptas las disposiciones contenidas en la misma.
Redacta tu opinión
Tu puntuación:
5/5
Añade tu propia foto del producto:
pixel