Réplica del subfusil KRISS Vector - Half Tan
- Material: Polímero + acero Peso: 2910 g Longitud: 430 / 670 mm Color: Half-Tan Velocidad de salida: ~335 FPS Motor: Eléctrico Fabricante: KRYTAC
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica del subfusil KRISS Vector - Half Tan
La esperada réplica licenciada del subfusil KRISS Vector fabricada por KRYTAC.
Al igual que las anteriores réplicas del fabricante KRYTAC, el KRISS Vector se caracteriza por la más alta calidad de la mano de obra y los materiales utilizados. Lo que más llama la atención son las marcas completas de la versión original de arma de fuego y la gran atención a la reproducción de cada detalle.
Prácticamente todos los componentes externos son de polímero de alta calidad. De polímero está hecho: cuerpo, culata plegable, miras plegables, corredera (imitación) igual que el original. El supresor de destello y los tornillos de montaje son de acero.
La réplica tiene un aspecto excepcionalmente realista y emite un aura "futurista" de KRISS. Tiene una rosca en el sentido antihorario de 14 mm en la que es posible montar un supresor de destello de acero. La réplica posee los detalles de construcción, como la empuñadura de la pistola y la culata iguales que la versión original. En la parte posterior del cañón hay un riel RIS de 22 mm, en el que se encuentran instrumentos de puntería plegables. En la parte inferior se encuentra otro riel RIS, en el conjunto encontraremos un tercer riel que puede montarse en el lado derecho o izquierdo de la réplica.
El corazón de la réplica es un GB especial. El usuario no tiene que preocuparse por la compatibilidad de las piezas en caso de algún posible tuning: casi todas las piezas internas, excepto el esqueleto GB, son compatibles con los estándares ya disponibles en el mercado.
En el conjunto se encuentra un cargador de polímero tipo Mid-cap con una capacidad de 95 bolas.
El conjunto incluye no batería ni cargador.
El conjunto no incluye:
- réplica
- cargador
- riel RIS adicional
- miras flip-up
- manual de usuario
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).