Réplica del subfusil PP-19 Bizon
- Material: acero + polímero + ZnAl Peso 2430g Longitud: 485/740mm Color: negro Velocidad: ~400FPS Tipo: AEG Fabricante: Cyma
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica del subfusil PP-19 Bizon
Réplica del subfusil PP19 fabricada por Cyma. Su prototipo fue una pistola ametralladora rusa construida a principios de los años 90 sobre la base del popular diseño de la carabina AK. Alimentada con munición de 9 mm (también había una variante de 7,62 mm: Bizon-2), la carabina compacta estaba dedicada para fuerzas especiales y policía
En su mayor parte, la réplica es de acero. Gracias a eso da una impresión muy sólida, los elementos también están muy bien encajados. Las piezas de acero son: el cuerpo, incluyendo la tapa del receptor, la culata, la empuñadura delantera y los pasadores de montaje. La empuñadura de la pistola y el cargador son de polímero reforzado.
La batería tipo Stick se encuentra debajo de la tapa de la cámara, igual que en la mayoría de las réplicas de AK. El set incluye la batería, así que todo lo necessario se encuentra en la caja. La réplica tiene una culata plegable hacia el lado izquierdo. Además, cuenta con un riel lateral para fijar visores ópticas específicas o rieles RIS adicionales. El cañón exterior terminado con una una rosca izquierda de 14mm, en la cual se encuentra un silenciador.
El corazón de la réplica es un gearbox v.3 fiable, que garantiza un fácil acceso a las piezas de recambio y para el tuning. En su interior se encuentra un conjunto de piezas reforzadas, que incluyen una cabeza de muelle y una cabeza de pistón montadas sobre cojinetes, un conjunto de engranajes de acero y cojinetes de acero de 7 mm, todo ello accionado por un motor de high torque.
Gracias a sus dimensiones compactas y buen equilibrio, el PP-19 Bizon es ideal para operaciones de airsoft de medio y corto alcance, incluso durante los juegos CQB.
El característico cargador tubular está hecha de polímero, es un mid-cap con una capacidad de 200 bolas.
El set incluye:
- réplica
- cargador Mid-Cap
- batería
- cargador para batería
- speedloader
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).