Réplica fusil CXP-MMR Carabina S1
- Tipo: metal + plástico Longitud: 835-930mm Peso: 2920g Color: negro Velocidad de salida: ~390 FPS Propulsión: eléctrica Fabricante: ICS
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica fusilcarabina CXP-MMR S1
CXP-MMR es un airsoft fusilek producido por la marcataiwanesa ICS, ,hecho con gran atención al detalle, utilizando materiales de alta calidad. Como corresponde a una construcción totalmente metálica, la mayor parte de las piezas externas, excepto el polímero grip pistola , los dispositivos de puntería y la culata, son de metal, mientras que las piezas pequeñas, como el cerrojo ficticio, muzzle o los enganches de la correa para el hombro son de acero.
Réplica está alimentado por un bipartito ICS Split Gearbox V2 con un muelle M120 instalado de fábrica, un circuito MOSFET, un sistema demuelle de cambio rápido y un conjunto de piezas reforzadas. Fusilla ec también cuenta con un sistema de imitación de retroceso realista Electric Blow Back, que pone en movimiento la culata del maniquí aumentando la experiencia de disparo.
Características réplicas:
- sistema Blow Back eléctrico
- rIS / Rieles Picatinny para monturau accesorios adicionales
- cama ligera en sistema M-LOK
- una pieza cámara metálica hop-up
- opticas plegable instrumentos abatibles
- ajustable culata S1
- ICS Split Gearbox con sistema de muelles de cambio rápido
- integrado sistema MOSFET
- tapa ampliada gatillou
- ergonómico grip pistola owy
- manija de recarga en ambos lados
- función de liberación del muelle después de pasar al modo "seguro"
- polímero cargador hi-cap con capacidad para 300 cartuchos
El kit no incluye la batería y cargadores.
El kit incluye:
- réplica
- cargador hi-cap
- manual de instrucciones
- juego de repuesto fusible
- cortador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).