- Licencia Daniel Defense Diseño: ZnAl + acero + plástico Longitud: 700-785mm Peso: 2675g Color: negro / bronceado / bronceado del caos Velocidad de salida: ~380 / ~310FPS MOSFET GATE X-ASR incorporado Fabricante: Specna Arms
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica eléctrica fusil Daniel Defense® MK18 SA-E19 EDGE™
LaMK18 SA-E19 EDGE™ es una arma de airsoft producida a través de una colaboración entre la empresa americana EMG Arms y la conocida marca de airsoft Specna Arms. Presenta las marcas autorizadas de Daniel Defense®en su cañón, así como un número de serie individual, confirmado por un holograma. Réplica La SA-E19 se caracteriza por una alta repetibilidad de los disparos y una gran precisión, y gracias a la utilización de piezas de alta calidad también está preparada para una mayor puesta a punto.
Réplicaestá equipado con un Gearbox ORION reforzado,que incluye:
- rodamientos de bolas de 8 mm
- acero engranajes
-reforzado con polímero pistón, con mandíbula completa de acero
- boquilla sellada de aluminio
- culata de aluminio doblemente sellada
- guía de muelle montada sobre cojinetes
Características réplicas SA-E19 EDGE™
RéplicaEl SA-E19 EDGE™ está equipado conelsistema de muelles de cambio rápido ESA™ .Esto le permite reemplazar el muelle instalado de fábrica por un muelle M90 más débil - ambos incluidos en el kit -sin ninguna herramienta yen cuestión de momentos.También puede utilizar sin problemas el muelle M140, más resistente, gracias al refuerzo de gearbox. En réplica tambiénhay unMOSFET X-ASR de laempresa polaca GATE ,que permitediagnosticar averías básicas, así como regular el trabajo del sistema gatilloy la electrónica.
Otras características réplicas fusil ka Daniel Defense® MK18 SA-E19 EDGE™:
- cuerpo acabado con Nano Coating - resistente a los arañazos
- cañón acabado con rosca CCW de 14 mm
- equipado con instrumentos plegables opticas
- cámara giratoria Hop-up
- tiene un cañón interior de precisión de 6,03 mm
- puede trabajar con los más débiles y los más fuertes muellemi
- dos cargadores mid-cap S-MAG con capacidad de 125 cartuchos
- piezas de alta calidad y posibilidad de ajuste adicional
- frontal raíl RIS 22 mm
- ojal de doble cara para monturau suspensión táctica
El kit no incluye una batería ni cargadores.
El kit incluye:
- réplica
- 2 x cargador mid-cap S-MAG
- adicional muelle principal M90
- grip vertical en el carril RIS
- manual de instrucciones
- certificado de control de calidad
- certificado de autenticidad EMG / Daniel Defense
- tarjeta de diagnóstico GATE X-ASR
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).