Réplica fusil de asalto LC-3A3-S - Negra
- Material: Acero + Nylon Peso: 4325 g Longitud: 1026 mm Color: Negro Velocidad de salida: ~400 FPS Motor: Eléctrico Fabricante: LCT
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
La compañía taiwanesa LCT se enorgullece de presentar la primera réplica en el mercado airsoft del potente fusil de asalto G3 que se ha acercado lo más posible al original y hecho de materiales similares a los del arma de fuego real original. Su adecuado peso (más de 4 kg), la construcción en acero y la perfecta atención a los detalles dan la impresión de estar interactuando con un fusil original, y no con una réplica de airsoft.
El LC-3A3-S se distingue por la más alta calidad de la mano de obra y los materiales utilizados. Para fabricar todos los elementos metálicos, se utilizó el acero. Los elementos de acero son entre otros: todo el cuerpo, el cañón externo, y la palanca de carga. Al igual que en el fusil original, elementos como la culata, el guardamanos, la empuñadura de la pistola y la protección de palanca de recarga están hechos de material de nylon. El acceso al sistema de ajuste Hop-Up se obtiene después de tirar hacia atrás la palanca de carga. La propia empuñadura se puede bloquear en la posición trasera, también es plegable para que no se destaque de la estructura compacta de la réplica.
El corazón de la réplica es un gearbox duradero v.2 equipado con rodamientos de 9 mm, en la que se montan una serie de componentes reforzados, como:
- set de engranajes de acero
- guía de muelle de acero, montada sobre cojinetes
- cilindro de latón
- cabeza de pistón CNC de aluminio
- cabeza de cilindro CNC de aluminio
- set de rodamientos de bolas de acero de 9 mm
Todo se acciona por un potente motor High-Torque de 25000rpm . La batería de la réplica se encuentra en el interior de la culata fija, no necesitamos ninguna herramienta para extraer la cantonera. El largo cañón interno de 6,03 mm, de hasta 515 mm, tendrá un impacto significativo en la eficacia del fuego.
La réplica viene con un cargador de acero Mid-Cap con una capacidad de hasta 140 bolas.
El set no incluye una batería ni un cargador.
El set incluye:
- réplica
- cargador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).