Réplica fusil ELAK12
- Construcción: Acero + plástico Peso: 4090g Longitud: 880-950mm Color: negro Velocidad de salida: ~450 FPS Propulsión: eléctrica Fabricante: E&L Airsoft
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica fusil ELAK12
El ELAK12 es un fusil de asalto ASG fusilfabricado por E&L, que se caracteriza por un grado de realismo excepcionalmente alto, como nos tiene acostumbrados en los anteriores productos réplicas de este fabricante. Como en el original, la mayor parte de los elementos exteriores son de acero. La cama es de polímero, junto con la cubierta del tubo de gasj, grip pistola owy, cargador y culata.
Es importante destacar que las piezas de acero están oxidadas, lo que hace que su aspecto sea aún más realista y, además, con el tiempo el proceso de abrasión del óxido proporcionará un efecto visual mucho mejor que en réplicas pintado o barnizado
También en términos de peso todo se ha hecho para el realismo. Réplica es pesado, y además el equilibrio adecuado está garantizado por el todo de acero cañón externo. Un elemento destacable es, sin duda, la posibilidad de desmontar parcialmente réplicas, al igual que su homólogo inflamable, sin necesidad de utilizar herramientas. Todo se basa en pasadores y palancas. El fabricante ha cuidado hasta el más mínimo detalle para que sus productos sean lo más parecidos al original.
Características fusil:
- acero cañón externo
- juego de rieles monturaow en estándar RIS / Picatinny
- culata con ajustablej de longitud, doblado adicionalmente hacia el lado
- selector de modo de disparo ergonómico
- perfilado grip pistola owy
LaELAK12 está impulsada por el duradero gearbox V3 equipado conelsistema de resorte de cambio rápido , gracias al cual no tenemos que desenroscar el esqueleto gearboxa para ajustar la velocidad de descarga réplicas a las reglas del campo de juego. En su interior encontrará elementos como:
- preciso cañón interior 6.04mm
- cámara metálica hop-up
- conjunto de silenciosos pistónuna cabeza y un cilindro
- guía de muelle con rodamientos
- motor tipo de alto par en imanes de neodimio.
Un polímero cargador tipo mid-cap con una capacidad de 150 bolas se adjunta a réplicas
Nota: el kit no incluye batería ni cargadores.
La caja contiene:
- réplica
- cargador
- certificado de calidad individual
- engrasador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).