- Material: plástico + metal Peso: 2830g Longitud: 740-835mm Color: bronceado Velocidad de salida: ~410 FPS Propulsión: eléctrica Fabricante: G&G
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica fusil GC18 MOD1
El réplicas está hecho de metal y plástico reforzado con fibra de vidrio. El conjunto ha sido perfectamente equipado. El metal se utilizó para el cuerpo, el frontal de grip, cañón externo, la guía de la petaca, los instrumentos mecánicos opticas y la mayoría de las piezas pequeñas. Por otro lado, la culata y grip pistola owy eran de plástico. Muzzle la culata es de acero.
Réplica tiene una culata telescópica con un compartimento para la batería. Culata es ajustable, por lo que se puede ajustar la longitud de la fusil a la complexión y preferencias del tirador. Grip pistola owy ha sido moldeada para asegurar el mejor ajuste posible en la mano. Bocacha se ajusta en 14mm rosca para zurdos.
Réplica es ideal para operaciones de medio alcance debido a su velocidad de descarga de ~410 FPS. El dorsal aplicado raíl RIS permite conectar cualquier dispositivo óptico de opticasgo, mientras que la batería multiposición y acomodable culata permite adaptar réplicas a las preferencias de cada usuario. El juego incluye un conjunto de miras plegables y mecánicas flip-up.
Además de las piezas de alta calidad típicas de G&G, la GB tiene instalado un innovador sistema ETU (Electronic Trigger Unit). El sistema sustituye completamente el bloque de contactos y actúa como un circuito de tipo MOSFET. Gracias al funcionamiento electrónico de gatillou, el sistema ha obtenido una excelente respuesta a gatillo. Cada vez que se pulsa gatillou se produce un ciclo completo de GB
El sistema ETU tiene la posibilidad de programar los modos de conducción del fuego. El usuario tiene acceso a los modos SAFE - SEMI y a la posibilidad de elegir entre FULL AUTO o ráfaga de 3 disparos. La programación es trivial: basta con poner el selector en la posición SEMI y mantener gatillo durante 10 segundos. Después de esta operación en el tercer ajuste del selector se iniciará el modo seleccionado
Réplica el dispositivo ha sido diseñado para usuarios diestros y zurdos. Manipuladores como: selector, extractor magasynka y palanca de recarga. Esto es especialmente útil en el caso de los juegos que requieren la traducción de réplicas al otro brazo del tirador.
El kit no incluye una batería ni cargadores.
El kit incluye:
- réplica
- cargador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).




















