Réplica fusil PRK9 RTS
- Diseño: aluminio + acero + polímero Longitud: 355-650mm Peso: 2590g Color: negro Velocidad de salida: ~330 FPS Propulsión: eléctrica Fabricante: G&G Armament
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica fusil PRK9 RTS
La serie réplicas PRK9 producida por una conocida y popular marca G&G Armament son construcciones extremadamente interesantes siendo un híbrido de un clásico fusil tipo AK y subfusil. Fusilel cañón es en su mayoría de metal, incluyendo elementos como la mira, muzzle, la manija de recarga y el selector de modo de disparo que son deacero. Grip pistolael cañón, cargador y culata son de polímero.
En réplica se han aplicado dos sistemas electrónicos: MOSFET y ETU (Electronic Trigger Unit) - que aumentan la vida útil de réplicas y mejoran los parámetros, como la respuesta gatillo o la rapidez de disparo, informan sobre el bajo nivel de carga de la batería y sobre posibles gearboxa daños. La ETU permite además programar los modos de disparo, incluyendo 3-5 series de bolas (ráfaga).
Características réplicas:
- eTUelectrónico
- MOSFET
- stock de aluminio ligero
- monturaRIS / Rieles Picatinny en la parte trasera de la cubierta y en la cama
- culata G&G GOS V4 con ajustablej length
- guía de petaca metálica, plegable a un lado
- perfilado grip pistola owy
- cámara giratoria hop-up
- barril terminado con rosca CCW de 14mm
- espacio para una batería de varilla bajo la cubierta de la culata (enchufe DEANS / T-connect)
- gearbox V3 sobre rodamientos de bolas de 8 mm
- corto motor 25000 RPM
Réplica es alimentado por un polímero dedicado cargadoresem tipo mid-cap con una capacidad de 40 bolas.
El kit no incluye una batería ni cargadores
El kit incluye:
- réplica
- cargador
- rápidocargador
- cortador
- herramienta de ajuste de la pajarita
- manual de instrucciones
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).