Réplica fusil Trident Mk-II M SPR - Negro
- Construcción: Acero + aluminio + plástico Longitud: 850-935mm Peso: 2950g Color: negro Velocidad de salida: ~410 FPS Propulsión: eléctrica Fabricante: Krytac
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica fusil Trident Mk-II M SPR
El Trident Mk-II M SPR de Krytac es un réplica de primer orden, tanto interna como externamente. El fabricante se ha asegurado de que réplica satisfaga a los jugadores de airsoft más exigentes "nada más sacarlo de la caja".
Réplicas Krytac se caracteriza por la alta calidad de sus materiales y por la primera clase de montura. El modelo está muy bien equilibrado y equipado. La suspensión Ugrip, muzzle y los pasadores son de acero ennegrecido químicamente. Se utilizó aluminio anodizado negro para el cuerpo, el frontal, el cañón exterior y la guía de la petaca.
Krytac es la rama de airsoft del fabricante de armas de fuego KRISS ARMS. El fabricante decidió subrayar este hecho aplicando la marca KRISS ARMS a la mayoría de los componentes de réplicas. Las piezas licenciadas incluyen el carril delantero KRISS® TR213 M-LOK, opticas KRISS® flip up iron sights, ergonómico grip pistola owy, dummy breech pusher y culata junto con una corredera de 6 posiciones.
En el corazón de la réplicas se encuentra una gearbox reforzada con integradom MOSFET, cojinetes de 8 mm y un sistema de muelles de cambio rápido. La cultura de funcionamiento de la réplicas está a un nivel muy alto, como demuestra el funcionamiento silencioso de los mecanismos y unos valores de FPS muy estables.
Características réplicas:
-Muy buen equilibrio y diseño compacto
-FrontM-LOK
-6 posiciones culata con pies de goma
-Marcas originales de KRISS ARMS
-Selector de tirode dos vías
-Cierre funcional del cerrojo
-Instrumentos de tipodeslizante opticas
-Soportes de suspensión de acero en ambos lados
Dentro de réplicas encontramos:
-Rodamientos de bolas de 8 mm
-Sistema de muelles de cambio rápido
-Casquillo con ventana para comprobar el AOE
-MOSFET
-Sellado cabeza de cilindro con parachoques de goma
-Engranajes reforzados
-Reforzado pistón con 4 dientes metálicos
-Cámara giratoria Hop-up
-Cañón de precisión de 6,03 mm
El kit incluye:
-Réplica
-Cargador Mid-cap para 150 bolas
-Raíl RIS M-LOK
-Adaptador de clavija T a Mini-Tamya
-Cortador
-Manual
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).