Réplica fusilbCM® CQB MCMR 11 AEG"
- Diseño: Aluminio, acero, plástico Peso: 3540g Longitud: 716-790mm Color: negro Velocidad de salida: ~390 FPS Fabricante: VFC
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica fusil BCM® CQB MCMR 11" AEG
La BCM® CQB MCMR 11" AEG es arma con licencia de un estante muy alto en términos de mano de obra y construcción interna. Réplica es el resultado de una colaboración entre la conocida y respetada Bravo Company Manufacturing® y Vega Force Company, un fabricante de airsoft con una reputación de la más alta calidad de mano de obra. Para la fabricación del modelo sólo se han utilizado materiales de alta calidad como el aluminio, el acero yelplástico de alta calidad.
El cañón exterior con gasow codo, el cañón y la guía de la petaca están hechos dealuminio . Los manipuladores, los pasadores, el maniquí de la corredera y BCMGUNFIGHTER™ Compensator MOD 0 - 5.56 supresor de llamas están hechos deacero fosfatado y oxidado .
Una petaca BCMGUNFIGHTER™ Mod 0-SOPMOD y grip pistola owy BCMGUNFIGHTER Grip Mod 3 fueron fabricados con plástico de alta calidad. Además, réplica ha sido equipada con una serie de comodidades como un pie de petaca de goma y gripu revestimientos, una empuñadura de carga ambidiestraBCMGUNFIGHTER™ Mod 4X4 y unafunda ergonómica gatillo u BCMGUNFIGHTER™
En el interior de réplicas encontrará, entre otras cosas, unsistema de control de disparo digital programable Virgo que le permite programar una serie de 3 disparos. Además, la réplica está equipada con Gearbox ECS con un sistema de muelle de cambio rápido, un cañón de precisión y una goma Hop Up de Maple Leaf.
Características réplicas:
- Marcas de la empresa BCM®.
- Guardamanos BCM® MCMR (M-LOK) 10" frontal.
- Culata y portafrascos equipados con tres puntos de sujeción al cinturón QD.
- Gearbox Sistema ECS y Virgo Sistema de control de disparo digital
- Cañón de precisión Hop Up Maple Leaf y banda de goma
Bravo Company Manufacturing® es un conocido y respetado fabricante de armas de fuego fundado por veteranos del Cuerpo de Marines de los Estados Unidos. BCM® es conocida por sus sólidas soluciones, que le han valido una gran cantidad de seguidores, entre los que se encuentran Travis Haley, GBRS Group y Larry Vickers.
El kit incluye:
- Réplica
- Cargador
- Raíles RIS en el sistema M-LOK
- Manual
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).