Réplica subfusil LK-53A2 - Negro
- Nombre del fabricante / marca: LCT
- Color: Negro
- Peso del producto [g]: 3700
- Material: Acero, Polímero
- Velocidad de salida [FPS].: 400
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica subfusil LK53A2
La marca taiwanesa LCT se enorgullece de presentar la primera en el mercadode airsoft réplica subfusil LK53 siendo unareproducciónlo más realistaposible del original, fabricada con materiales lo más parecidos a su homólogo inflamable. Su peso razonable (casi 4 kg), su construcción en acero y su perfecta atención a los detalles dan la impresión de estar en contacto con un fusilu inflamable, y no con su homólogo de airsoft réplica.
El LK53 se distingue por la más alta calidad de la mano de obra y los materiales utilizados, por los que es famoso réplicas LCT. Todas las piezas metálicas son deacero. Acero es, por ejemplo, el cañón, cañón externo, la base del mosquete o el mango de recarga. Siguiendo el ejemplo de la fusilu inflamable, elementos como el cuerpo inferior, la petaca, la cama, la grip pistola owy y la cubierta de la manija de recarga están hechos de plástico de nylon. Después de tirar de la palanca de recarga accedemos al ajuste del sistema Hop-up. La propia empuñadura puede bloquearse en la posición trasera, y también es plegable para no sobresalir del cuerpo compacto de la fusilu.
El corazón de la réplicas es un robusto gearbox v.2 equipado con rodamientos de 9 mm, en el que se han montado una serie de componentes reforzados, como:
- un juego de engranajes aceroch
- guía de muelle de acero, montada sobre cojinetes
- latón cilindro
- cabeza de aluminio pistóna CNC
- culata de aluminio CNC
- juego de aceroch 9mm rodamientos de bolas
Todo ello está impulsado por un potente motor High-Torque 25000rpm. La batería réplicas encaja en el interior de la petaca fija, no se necesitan herramientas para retirar el reposapiés. La eficacia del fuego se verá afectada significativamente por el latón 270mm cañón interior.
El réplicas viene con un acero cargador tipo mid-cap con una capacidad de 100 bolas.
El kit no incluye una batería ni cargadores.
El kit incluye:
- réplica
- cargador
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).