RRA SA-E03 EDGE™ réplica de fusil
- Nombre del fabricante / marca: Specna Arms
- Color: Negro
- Peso del producto [g]: 4500
- Material: Metal, Polímero
- Velocidad de salida [FPS].: 370
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
¿Cuáles son las características de la réplica de fusil RRA SA-E03 EDGE™?
Réplica RRA SA-E03 EDGE™< es un modelo de Specna Arms, fabricado bajo licencia de Rock Rired dot Arms< - un fabricante de armas de fuego. La réplica utiliza piezas y materiales duraderos para prolongar su vida útil, así como soluciones de este tipo que facilitan el diagnóstico y permiten el ajuste de potencia. Es una réplica de airsoft red dotsátil, dando la posibilidad de adaptar la velocidad de descarga y los parámetros a las condiciones de juego.
El corazón de la réplica RRA SA-E03 EDGE™ es la gearbox ORION Gearbox, que cuenta con:
- marco reforzado
- función de liberación del muelle real
- pistón de polímero reforzado
- nozzle sellada de aluminio
- cabeza de cilindro de aluminio de doble sellado
- guía de muelle montada sobre rodamientos
- juego de engranajes de acero
- rodamientos de bolas de 8mm
¿Qué distingue al modelo RRA SA-E03 EDGE™?
La fusil está equipada con el sistema de muelle de cambio rápido ESA™, que le permite cambiar el muelle real en tan solo unos minutos. También encontrará el circuito MOSFET X-ASR de la marca polaca GATE. Su tarea es cuidar de la seguridad de los componentes de la réplica, mejorar la respuesta al gatillo, así como prolongar la vida útil de la electrónica y la batería. También permite el diagnóstico de ared dotías básicas que pueden ocurrir dentro de la réplica.
Otras características del modelo RRA SA-E03 EDGE™:
- Cuerpo resistente a arañazos - protegido por Recubrimiento Nano
- marcas profundamente grabadas Rock Rired dot Arms en el cañón y un holograma certificado número de serie individual
- empuñadura de pistola QD
- ojal de doble cara para montaje de correa táctica
- raíl delantero y dorsal corto en estándar RIS 22mm
- rosca 14mm CCW
- miras plegables
- Cañón de precisión interno diámetro 6,03mm
- cámara Hop-Up giratoria
- capacidad de réplica tuningi - gearbox puede trabajar con muelles más fuertes M140
- dos cargadores mid-cap S-MAG con una capacidad de 125 cartuchos
El kit no incluye batería ni cargador.
El kit incluye:
- réplica
- 2 cargadores S-MAG de mid-cap
- muelle real M90 extra
- manual de instrucciones
- certificado
- tarjeta de diagnóstico GATE X-ASR
- empuñadura táctica
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).