SA-H11 ONE™ réplica de fusil - bronceado
- Nombre del fabricante / marca: Specna Arms
- Color: Tan
- Peso del producto [g]: 3000
- Material: Metal, Polímero
- Velocidad de salida [FPS].: 410
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Características de la réplica fusil SA-H11 ONE™
Réplica fusil SA-H11 del fabricante Specna Arms es una réplica de airsoft bien ajustada y muy bien equilibrada. Está hecha de uniforme aleación de zinc y aluminio, y las zonas más sensibles son de acero, a saber empuñadura de correa, tornillos y pasadores. Se caracteriza por una maniobrabilidad casi ideal, alta funcionalidad, así como red dotsatilidad - puede utilizar la réplica en el campo de batalla abierto y en interiores.
La réplica está equipada con una gearbox reforzada, que incluye:
- engranajes de acero
- cuatro trinquetes antirblow-back
- cilindro tipo 2
- cut off de acero
- rodamientos de bolas de 8 milímetros
Características principales de la réplica SA-H11 ONE™
La SA-H11 ONE™ réplica cuenta con un cambio rápido de muelle Enter & Conred dott™, que le permite cambiar el muelle en sólo segundos. De este modo puede reducir muy fácilmente la velocidad de descarga de ~410 FPS a ~310 FPS. Todo lo que necesita hacer es reemplazar el muelle principal más fuerte por el muelle más débil M90, que también se incluye con la réplica. El aumento de la bola puede a su vez ajustarse con precisión con la cámara Hop-Up giratoria y de polímero.
Otras características de la réplica de fusil SA-H11 ONE™:
- petaca ajustable de polímero y empuñadura de pistola
- nen el cuerpo de la marcas del fabricante
- equipado con manipuladores en ambos lados
- desbloqueo de cerradura funcional
- compatible con Baterías LiPo y LiFe
- equipada con raíl RIS dorsal de 22mm< y conjunto de raíl RIS frontal
- dispone de instrumentos de puntería metálicos tipo flip-up
- pintura resistente a la abrasión gracias al recubrimiento en polvo
- rosca izquierda de 14 milímetrost permite la instalación de un atenuador de sonido
- anodizado montaje Riel RIS
- cargador hi-cap tiene 300 bolas
El juego no incluye batería ni cargador.
El juego incluye:
- cargador
- visores mecánicos
- muelle real extra
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).