Specna Arms SA-FX01 FLEX™ GATE X-ASR 1.14 J Half-Tan Carabina airsoft
- Nombre del fabricante / marca: Specna Arms
- Color: Half-Tan
- Peso del producto [g]: 1975
- Material: Metal, Polímero, Acero, Polímero
- Velocidad de salida [FPS].: 320
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Réplica de la fusil SA-FX01 FLEX™ GATE X-ASR.14 J
La fusil tiene instalado de fábrica un MOSFET X-ASR marca polaca GATE. Se trata de una colaboración sin precedentes entre un fabricante polaco y una conocida fábrica de armas de airsoft. El MOSFET X-ASR de la más alta calidad cuidará de la seguridad de los componentes de la réplica, mejorará la respuesta del gatillo y la vida útil de la electrónica y la batería, y le permitirá diagnosticar ared dotías básicas dentro de la réplica gracias a los LEDs indicadores incorporados.
Specna Arms presenta una línea de réplicas - FLEX™ Enhanced con chip GATE X-ASR. Precio atractivo junto con innovador sistema de sustitución de muelles y materiales de alta calidad hacen que esta serie sea especialmente atractiva para jugadores principiantes de airsoft.
El cuerpo, la parte delantera tipo free-float, la corredera junto con la batería que aloja la petaca ampliada tipo SF así como la empuñadura de la pistola están fabricados de polímero reforzado con fibra de nylon. Para el cañón, el supresor de llamas, el asa de recarga ampliada y los manipuladores se han utilizado aleaciones de aluminio y ZnAl. Todos los tornillos, pasadores, la ventana de expulsión y la cerradura falsa son de acero.
El cañón ha sido muy bien ajustado el usuario no experimentará ningún juego entre las partes inferior y superior del cañón. El uso de un cuerpo y un frontal fabricados en plástico ligero ha permitido reducir el peso, por lo que resulta ideal como réplica para partidas dinámicas CQB. Además, el refuerzo de fibra de nylon hace que la construcción sea más duradera que otras construcciones de polímero.
La réplica utiliza el sistema de cambio rápido de muelle, ESA™. Esto permite adaptar rápida y eficazmente la potencia de la réplica a las condiciones esperadas en el terreno de juego sin necesidad de acceder a un taller o a una serie de herramientas especializadas.
En el interior encontramos:
- cojinetes lisos de 8mm
- engranajes de acero- pistón de plástico de policarbonato con falda completa de acero
- cilindro tipo 2
- Interruptor de acero
-Cámara giratoria
El apagallamas se ajusta en una rosca izquierda de 14mm.
El paquete incluye:
- S-Mag Hi-Cap Cargador
- Tarjeta de diagnóstico GATE X-ASR
- Réplica
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).