Subfusil airsoft Arcturus PP19-01 Vityaz ZTAC SP1 CQB AEG FE™
- Nombre del fabricante / marca: Arcturus
- Color: Negro
- Longitud del producto [cm]: 77.70
- Peso del producto [g]: 2920
- Material: Aluminio, Acero, Polímero
- Velocidad de salida [FPS].: 370
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Subfusil airsoft Arcturus PP19-01 Vityaz ZTAC SP1 CQB AEG FE™
Réplica del subfusil PP-19-1 Vityaz fabricada por Arcturus equipada con un conjunto de piezas de tuning inspiradas en los accesorios Zenitco. El AEG PP-19-1 Vityaz se fabricó principalmente con acero, aluminio y un polímero duradero. El acero se utiliza para el supresor de llamas, la cuerda del arco, el tubo de gas, la cabeza de cilindro, la cubierta, la cabeza de cilindro falsa, la palanca selectora, el mecanismo de bloqueo de la petaca, el guardamonte, el pestillo de la petaca, el pestillo del cargador, la cabeza de cilindro y la recámara de la cabeza de cilindro falsa. El cañón, el supresor de llamas, el raíl RIS dorsal y el conjunto del raíl RIS son de aluminio . El cargador, el asiento del cargador y la empuñadura de la pistola son de polímero.
Todas las piezas están ajustadas con gran precisión, las piezas metálicas se han acabado con un revestimiento mate anticorrosivo. El interior de la réplica ofrece muy buenas prestaciones en la configuración de fábrica y una buena base para el tuning.
En el interior de la réplica encontramos
-Cañón de precisión de 6.03mm
-Cámara Hop Up giratoria
-Motor de 21TPA
-Engranajes de acero 18:1
-Tobera de POM CNC
-Cilindro de acero inoxidable mecanizado CNC
-Pistón con mordaza de acero
-Sistema de muelles de cambio rápido con guía de muelles con cojinetes de acero
El modelo pertenece a la serie FE o Feature Enhanced, lo que significa que la réplica está equipada con un sistema de control óptico programable.
Características del sistema óptico FE ETU
-Preamartillar (7 grados)
-Ruptura activa (8 grados)
-Dureza del gatillo ajustable (5 grados)
-Rearme del gatillo ajustable (5 grados)
-Gatillo progresivo guiado por algoritmos
-Gatillo hair-trigger adaptable
-Modos de disparo programables
-Disparador binario con rampa
-Protección de batería baja
-Fusible electrónico
El paquete incluye:
- Adaptador Deans - Tamyia peque?a
- Mid-Cap Cargador
- Parche
- Réplica
Paquete excluido:
- El kit no incluye la batería y cargadores.
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).