Subfusil de airsoft Ronin TK.45 3.0 (versión 1.2J)
- Longitud: 740-810mm Peso: 3545g Construcción: metal + aluminio + plástico Velocidad de salida: ~360 FPS Fabricante: KWA
The product does not constitute ballistic protection and has no other protective properties. It is not intended for use in protective purposes, including during tactical/war/ASG games.
The use of the product for ballistic protection and/or for other protective purposes, including the use during tactical/war/ASG games, is the use of the product contrary to its intended use, in which case the buyer does so solely at his own risk.
The vendor is not liable for damage to the product, that might result from the use of the product contrary to its intended purpose, this also applies to all possible health consequences (bodily harm) for the user (buyer) or damage to property. Moreover, a misuse of the product will void the warranty on the product.
The vendor is liable to the buyer under the warranty for product defects (in the event of such defects) only if the buyer/user uses the product for its intended purpose, i.e. for purposes other than protective purposes, including the use during tactical/war/ASG games.
The lack of any protective properties of the product is a feature, not a product defect, and therefore it does not constitute a physical defect of the product within the meaning of the Polish Civil Code.
Ametralladora de airsoft Ronin TK.45 3.0 (versión 1.2J)
Ametralladora de airsoft El Ronin TK.45 3.0 del renombrado fabricante KWA está fabricado con piezas metálicas y un robusto polímero. El cuerpo metálico de la RONIN lleva las marcas del fabricante. El frontal MLOK con una longitud de 10" también es de metal.
Réplica a primera vista se parece a los modelos anteriores demina, pero esta vez KWA tuvo la tentación de crear una réplicas subfusil powered cargadores en el estilo de pistola.
El respaldo raíl RIS 22mm, fabricado enaluminio en maraílch CNC permite montura diversos accesorios: colimadorel uso de el sistema monturaowego MLOK en la parte inferior y en los laterales del frontal le permitirá colocar accesorios al operador. El juego incluye instrumentos plegables opticas. Réplicas la serie Ronin también se caracteriza por sus interesantes manipuladores personalizados, en este caso duplicados por ambos lados réplicas
Réplica están equipados con una Gearbox reforzada AEG2.5 con la posibilidad de ajustar la velocidad de descarga de 330-380FPS. Otra solución interesante es la compatibilidad total con los circuitos electrónicos, por ejemplo, TITAN de GATE. El réplica utiliza una cámara de precisión Hop-up del tipo Rotary
El Ronin TK.45 3.0 también está equipado con un sistema de simulación de retroceso (Kinetic Feedback System), un sistema de muelle de cambio rápido y unsistema de ajuste de FPS (en la guía del muelle)
Fabricado en polímero cargador tipo Mid-cap tiene capacidad para 120 balas
Nota: El kit no incluye una batería o cargadores
El kit incluye:
- réplica
- cargador
- manual de instrucciones
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).