SA-A03 ONE™ SAEC™ System TITAN™ V2 Custom Carbine Replica - black
- Version with TITAN™ V2 system Material: ZnAl + Steel + Polymer Length: 700 - 785 mm Weight: 2580 g Color: Black Muzzle Velocity: ~430 FPS / ~310 FPS Quick Spring Change System SAEC™ Manufacturer: Specna Arms
Le produit ne constitue pas un moyen de protection balistique et n’a pas d’autres propriétés protectrices. Il n’est pas destiné à des fins de protection, y compris dans le cadre des jeux tactiques / des jeux de guerre / de l’airsoft.
L’utilisation du produit à des fins de protection balistique et / ou à d’autres fins de protection, y compris dans le cadre des jeux tactiques / des jeux de guerre / de l’airsoft, sera considéré comme une mauvaise utilisation du produit. Dans un tel cas, l’acheteur n’agit uniquement à ses propres risques.
Le vendeur ne peut être tenu responsable des dommages au produit résultant d’une mauvaise utilisation du produit, y compris les éventuelles conséquences sanitaires de l’utilisateur (de l’acheteur) ou les dommages matériels. Dans ce cadre, le produit lui-même ne fait l’objet d’aucune garantie.
Le vendeur n’est responsable envers l’acheteur au titre de la garantie pour les défauts du produit (si de tels défauts surviennent) uniquement à condition que l’acheteur / l’utilisateur utilise le produit d’une manière conforme à son utilisation prévue, c’est-à-dire à des fins autres que la protection, notamment dans le cadre des jeux tactiques / des jeux de guerre / de l’airsoft.
L’absence de propriétés protectrices du produit constitue une caractéristique et non un défaut du produit et, par conséquent, ne constitue pas un défaut physique du produit au sens du Code civil.
SA-A03 ONE™ SAEC™ System TITAN™ V2 Custom Carbine Replica
Limited edition with TITAN™ V2 Advanced system by GATE installed!
Drop-In MOSFET type TITAN™ V2 controller set transforms an AEG into an advanced training replica. It provides a tactical advantage thanks to a lightning-fast trigger reaction time with the ability to modify the replica and adapt it to every mission with the help of 20 available functions. This is the most advanced and top model by GATE.
TITAN™ V2 controller will breathe new life into an ASG electric replica.
TITAN™ provides new possibilities:
- Trigger sensitivity adjustment
- Pre-cocking boost - adjustment of the time that the spring is being kept pulled (shortens the time between a squeeze of the trigger and firing)
- Adjustment of fire mode selector modes
- Burst mode
- Fire rate adjustment
- Notifies about a low battery level
- Protects battery from damage
- “Sniper delay”
- Full cycle detection
- AUG mode - the ability to set two trigger sensitivities (semi and full-auto)
Full system description: https://gunfire.com/pl/products/zestaw-kontrolera-titan-tm-v2-advanced-set-rear-wired-1152218717.html
SA-A03 assault rifle replica by Specna Arms is made largely from a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). Both the SF stock storing the battery and the pistol grip were made of polymer. The receiver of the replica and the RIS handguard have undergone the process of anodizing, which guarantees a high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion.
The replica’s parts fit very well together - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered.
The replica features a new generation quick spring release system, so-called SAEC™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have access to a workshop or a set of special tools. The spring change process is even faster than in the case of the previous version of the system.
Thanks to SAEC™ System there is no need to take out the gearbox from the replica - all that is required is to remove the stock slide (no tools are necessary - it is attached with a tightened ring and a latch), afterward, it is necessary to loosen the located underneath pin along with a bearing-mounted spring slide. We exchange the main spring, screw in the pin back in the body, attach the stock and... we’re back in the game! The entire operation lasts but a moment and, let us say it again, does not require the use of any tools.
The advantages of SAEC™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. SAEC™ system allows with a minimal amount of time to change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the user himself as well as other participants.
The replica is fully compatible with LiPo and LiFe batteries. Due to the base muzzle velocity of ~425 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating in a medium range. The set also includes an M90 spring, which allows reducing the muzzle velocity to ~325 FPS and as a result to adapt the replica for close-ranged and indoor operations.
A reinforced at the cylinder level gearbox contains a steel spring slide that is an element of SAEC™ system and mounted on 8 mm ball bearings and washers steel gears. The system is secured with four anti-reversal latches. A light, made of polycarbonate polymer piston is equipped with a set of steel teeth in order to increase its durability. Also implemented were a type 2 cylinder and a steel circuit-breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.
The upgraded version features an array of new, reinforced parts such as:
- set of reinforced, steel gears
- bearing-mounted, steel spring slide
- light, polymer piston with a steel strip
- aluminum tightened piston head
- metal cylinder head
- tightened, metal nozzle
The replica is equipped with a 22 mm top RIS rail, RIS handguard and an adjustable stock. The top RIS rail features metal flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the user. A standard flash hider is based on 14 mm left-hand thread, which allows the attachment of a silencer in its place.
In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.
The replica comes with a steel, 300 BB, Hi-Cap magazine.
Specna Arms replicas are compatible with many magazines available on the market, from manufacturers like:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.
SAEC™ system is included in the European Patent with a number: 002639500
The set does not include a battery or a charger.
The set includes:
- limited edition replica with TITAN™ V2 system installed
- USB plug for the control unit using GATE Control Station app
- magazine
- iron sights
- additional main spring
Les batteries rechargeables de type NiCd (Nickel-cadmium) sont caractérisées par leur capacité à délivrer le courant avec une grande efficacité, mais leur mémoire étant volatile il faut attendre leur déchargement complet avant de les recharger immédiatement après. Attention, ces batteries sont interdites dans l'Union Européenne. Vous pouvez consulter la directive 2006/66/CE
Les batteries rechargeables de type NiMH (Nickel-Metal Hybride) se décharge plus lentement et une plus durée de vie plus faible (500-1000 cycles) – D'un autre coté, elles ont 30% de capacité en plus.
Le Blow Back est une simulation du levier d'armement – Cela reproduit le fonctionnement de l'arme réelle. Ce système est présent bien sur pour l'esthétique, mais augmente aussi le réalisme et génère plus d'expérience aux tireurs durant le tir.
Correspond à la vitesse de la bille au moment ou elle sort du baril de la réplique. Cette vitesse est mesuré en FPS (Feet Per Second)
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Les indications v2,v3,v6 ne représentent pas le niveau technologique ou une amélioration, mais la forme du châssis de la gearbox utilisé et sélectionné par le fabricant, et dépend du châssis de la réplique. Par exemple, les modèles de la famille des M4/M16, MP5 ont une gearbox v2, alors que les modèles de la famille AK ont une gearbox v3.
Le systeme Hop-Up est utilisé pour booster les billes durant le tir (elles tournent ainsi sur elles-même), prolongeant ainsi sa trajectoire de vol. Physiquement parlant, la bille a tendance à se soulever pendant que les lois de la gravité la force à être attiré vers le bas. Un réglage approprié du Hop-Up compensera ces deux facteurs, ce qui donnera une trajectoire droite et longue sur une plus longue distance influant ainsi sur la précision