240B Machinegun Replica
- Material: Metal + polymer
- Weight: 7800 g
- Length: 1240 mm
- Color: Black
- Muzzle Velocity: ~400 FPS
- Engine: Electric
- Manufacturer: Golden Eagle
240B
Machinegun Replica
The replica was
made mainly of high-quality metal. Elements such as the stock, barrel shroud
and the anti-slip panel of the transport handle were made of high-quality
polymer. The transport handle was made of steel, which directly translates to
its stability and durability. The well-aligned construction is characteristic
for its significant durability as well as noticeable weight - almost 8
kilograms. The size and weight of the replica limit the freedom of movement in
the field. The replica had been equipped with RIS rails located on the barrel
shroud as well as on the receiver, which enables the attachment of additional
accessories such as a scope, laser sight or a flashlight.
Inside the gearbox there are following elements: a short motor with increased
torque, reinforced gears, a pinion gear with four anti-reversal latches, 8 mm
ball bearings, ball bearing steel spring guide, air-sealed brass nozzle, chrome
type 0 cylinder, silicon piston head seal, m110 spring, 551 mm long 6.03
precision internal barrel and low-resistance wires. Parts implemented in this
replica increase its tuning potential.
The set includes:
- replica
- magazine
- charger
- battery
- cover for the magazine
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).