AM-015 subcarbine replica dark earth
- Material: Polymer + Metal
- Weight: 2095g
- Length: 665-775mm
- Colour: Dark Earth
- Muzzle Velocity: ~360 FPS
- Engine: Electric
- Manufacturer: Amoeba Airsoft
AM-015-DE Submachine Gun Replica
The newest series of
replicas by Amoeba Airsoft is based on a well-known design of AR assault
rifles. However, these replicas were appropriately modified and upgraded with
many construction details and interesting technological solutions,
which increase not only their functionality but also visual appearance. Due to
its compact size, AM-015 is very handy and the shortest of all Amoeba replicas,
which makes it ideal for airsoft operation during CQB scenarios.
The receiver of the replica
was made from a reinforced nylon. The quality of materials used makes it
difficult to notice straight away that it is in fact polymer not metal.
Receiver boasts effective in appearance markings, among other, of model,
caliber and Amoeba Airsoft logo. Metal parts include: outer barrel, sound
amplifier (used for disorienting the enemy), thread cover and small
elements. The pistol grip is adequately profiled and covered with a rough,
anti-slip texture that increases comfort and steadiness of the grip.
Magazine release button was enlarged in order to make its usage easier.
The replica has a light,
polymer stock, whose length can be adjusted and which stores a
battery. Access to the Hop-Up regulation knob is gained in a traditional
way in this type of construction - by pulling back the charging handle and
uncovering the shell ejection port.
AM-015 has a top, 22mm,
RIS mounting rail, which allows for the attachment of a wide variety of
additional accessories, starting with optical sights and ending up with
flashlights. The submachine gun has fixed iron sights: flip-up front and
rear sights, attachable to a RIS rail. In addition, the replica was
equipped with a small RIS handguard that allows for
the attachment of a tactical forward grip (included in the set) or other
accessories.
The outer barrel has a 14mm,
right-handed thread finish, that allows for the attachment of an outer barrel
extension / silencer.
Amoeba Airsoft replicas
have the ability to rapidly replace the spring without having to
disassemble the gearbox skeleton. The heart of this replica is a
reinforced, slightly modified gearbox v.2, with an integrated EFCS -
Electronic Firing Control System module. It controls the operation of the
trigger mechanism, allowing for smooth operation and, above all, shortens the
motor reaction time to a squeeze of the trigger. A standard connector cube
was replaced with an electronic system. EFCS has an in-built MOSFET
module.
EFCS significantly prolongs
the lifetime of the mechanism, thus of the entire replica and allows to use
a high-voltage battery, including LiPo. After purchasing
an external, dedicated EFCS programmer, the user will gain the ability
to set the sequence of fire modes, as well as the burst mode (3-BB fire).
The replica comes with a
mid-cap magazine with a capacity of up to 140 BBs. The magazine casing was made
from a special rubber and has ergonomic shape with additional corrugation
in order to make its usage easier and eliminate slipping of the magazine at key
moments.
The set does not include a battery or a
charger.
The set includes:
-
replica
- magazine
- tactical forward grip
-
magazine speedloader
-
cleaning rod
- manual
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).