AM-016 Assault Rifle Replica - Black
- Material: Polymer + Metal
- Weight: 2410 g
- Length: 700 - 820 mm
- Colour: Black
- Muzzle Velocity: ~370 FPS
- Engine: Electric
- Manufacturer: Amoeba Airsoft
AM-016 Assault Replica
The
newest series of replicas by Amoeba Airsoft is based on a well-known
design of AR assault rifles. However, these replicas were appropriately
modified and upgraded with many construction details and interesting
technological solutions, which increase not only their functionality but
also visual appearance.
The
receiver of the replica was made from a reinforced nylon. The quality of
materials used makes it difficult to notice straight away that it is in fact
polymer not metal. Receiver boasts effective in appearance markings,
among other, of model, caliber and Amoeba Airsoft logo. Metal was used in the
manufacture of the handguard, outer barrel, silencer, stock slide and several
miscellaneous elements. The pistol grip is adequately profiled and covered with
a rough, anti-slip texture that increases comfort and steadiness of the
grip. Magazine release button was enlarged in
order to make its usage easier.
The
replica features a telescopic, adjustable stock, which allows to adapt
the length to the user’s body shape and preferences. The battery can be stored
inside the stock and its slide. Access to the Hop-Up regulation knob is
gained in a traditional way in this type of construction - by pulling back the
charging handle and uncovering the shell ejection port.
AM-016
has an Octarms KeyMod
modular handguard that allows for full
adaptation of the replica to the individual needs of the user. RIS 22 mm
rail segments can be attached to the handguard in multiple positions thanks
to the holes around it. RIS mounting rail located on the top of the receiver
allow for the attachment of a wide variety of additional accessories, starting
with optical sights and ending up with flashlights. The assault rifle has fixed
iron sights: flip-up front and rear sights, attachable to a RIS rail.
Amoeba
Airsoft replicas have the ability to rapidly replace the spring without
having to disassemble the gearbox skeleton. The heart of this replica is a
reinforced, slightly modified gearbox v.2, with an integrated EFCS -
Electronic Firing Control System module. It controls the operation of the
trigger mechanism, allowing for smooth operation and, above all, shortens the
motor reaction time to a squeeze of the trigger. A standard connector cube
was replaced with an electronic system. EFCS has an in-built MOSFET
module.
EFCS
significantly prolongs the lifetime of the mechanism, thus of
the entire replica and allows to use a high-voltage battery, including LiPo. After purchasing an external, dedicated EFCS
programmer, the user will gain the ability to set the sequence of fire
modes, as well as the burst mode (3-BB fire).
The
replica comes with a polymer hi-cap magazine with a capacity of up to 300 BBs.
The magazine has a rough, anti-slip texture and a foldable pull-mag handle.
The set does not include a battery or a charger.
The price of the replica does not include optional accessories visible
in the preview photographs. List of elements included
in the set below.
The set includes:
-
replica
- magazine
- manual
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).