ASR110 Guardian Match Rifle Replica - Black
- Material: metal, plastic
- Length: 930 - 1015 mm
- Weight: 2780 g
- Color: black
- Muzzle Velocity: ~400 FPS
- Manufacturer: APS
ASR110 Guardian Match Rifle Replica
The ASR110 assault rifle replica by APS is an innovative design based on a construction typical for the family of popular American carbines, equipped with the RAS Guardian RTS assembly and a free-float outer barrel system. The top RIS rail allows for attaching optical sight devices, such as a scope or a red dot sight, but by default the replica comes with mechanical flip-up sights, precisely made of durable composite plastic, the so-called APS Rhino Iron Sights. The sights deserve special attention - they allow you to fire the replice both from a high and low a profile, thanks to the possibility of setting the sights in two positions.
The replica is equipped with a multi-position RS-1 stock and a highly ergonomic pistol grip. The RAS Guardian unit itself is also extremely functional and comfortable to use, and its forward design allows you to shoot using many different methods of support.
The RAS Guardian RTS (Rail Transformation System) itself is probably the most characteristic feature of the replica. The rail allows for full adaptation to the individual needs of the operator. RIS rail segments can be connected to the RAS in usual positions (top, bottom, right, left) as well as in intermediate settings (left-top, right-bottom etc.).
The heart of the replica is the V2 gearbox with a quick spring change system, from the latest eSilver Edge series with the High Torque motor. Housed within the replica is the SDU 2.0 chip which is fully programmable. The user is able to change his wherever and at any time he wishes. No additional external devices are needed. To use the chip, press the button located on the bottom of the front part of the gearbox frame. The button is located in the magazine slot. When pressed and held, the red LED should light up. The button should be held down until the LED blinks twice. We have one of five modes available to program:
Mode 1: Safe-Semi-Auto (factory setting)
Mode 2: Safe-Semi-Burst (3)
Mode 3: Safe-Burst (2) -Auto
Mode 4: Safe-Burst (3) -Auto
Mode 5: Safe-Burst(3)-Burst(9)
Double pressing the button or disconnecting the battery will reset the system to factory settings.
The replica comes with a plastic hi-cap magazine with a capacity of 300 BBs
Note! The set does not include a battery or a charger!
Set contains:
- replica
- magazine
- RIS rail sections
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).