CM045C subcarbine replica
- Material: steel + ZnAl + aluminium + plastic
- Weight: 2840g
- Length: 490/730mm
- Colour: black
- Initial muzzle velocity: ~420 FPS
- Drive: electrical
- Manufacturer: CYMA
CM045C subcarbine replica
The family of CYMA replicas based on popular Russian assault rifles has been complemented with a new line - modified with a range of 'tactical' accessories, increasing ergonomy and possibilities of configuration of this classical design.
The replica has been perfectly matched, there are no backlashes here, the product was thoroughly finished in mat, black colour. Steel, aluminium, alloy of Zn and Al as well as polymers were used in the construction process. The receiver, the folding stock, the dust cover, the trigger guard and the fire selector were made of steel.The front RIS rail system was made of aluminium, whereas the pistol grip was made of plastic.
The replica has got a frame stock folded at side. In the place of a standard front guard, the complete conversion with 22mm RIS mounting rails was applied here, which allows to equip the rifle with additional accessories. Moreover, on the left side of the body the AK side rail was located - this allows to mount dedicated scopes or additional RIS rails. On the right side there is a fire selector, distinctive of AK.
Disassembling of the replica and mounting additional accessories is eased by the design itself based on pins and levers - similar to the real steel and other AK replicas in the popular standard VFC. The outer barrel ends with a 14mm left-hand thread, where the flash hider was mounted. The replica's battery is located under the dust cover (included in the set).
The replica is driven by a very reliable and easy to upgrade gearbox v.3 with a strengthened frame. A set of steel racks , steel 7mm slide bearings, a strengthened piston and spring slide were mounted inside. Efficiency is ensured by a 250mm long inside barrel and a tight metal Hop-up chamber.
The replica goes together with a plastic hi-cap magazine with capacity of 500 BBs
The set includes:
- replica
- magazine
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).