CZ Scorpion EVO 3 A1 Submachine Gun Replica - HPA Edition
- Material: Polymer + Aluminum
- Weight: 1880 g
- Length: 623 / 425 mm
- Color: Black
- Muzzle Velocity: ~395 FPS
- Engine: HPA
- Manufacturer: ASG / Wolverine
CZ Scorpion EVO 3 A1 Submachine Gun
Replica
CZ Scorpion EVO 3 A1 is a phenomenon on the airsoft
market - the first replica to be entirely designed and manufactured in
Europe, by a Danish company - Action Sport Games DK. Thanks to a
license granted by Česká zbrojovka
a.s., the manufacturer of the live
firearm original, we can feast our eyes with original markings
and naming. The replica was reproduced in detail in 1:1 scale - both the
measurements and the weight were brought as close as possible to that of the
original.
The replica was made of materials very similar to those
used in the original. The receiver with the stock and handguard were made of a durable
polymer, reinforced with fiberglass. The internal barrel was made of a
single piece of aluminum using precise CNC machines, just like
the flash hider and barrel nut. The aforementioned markings, identical to
those of the original, are pleasant to the eye - CZ logo, caliber
designation, manufacturer, serial number. Every detail has been taken care of.
The replica is equipped with a long, top RIS rail and 3
universal RIS 22mm mounting rails on the handguard. Thanks to
them, it is possible to attach a wide array of additional accessories to the
replica. The safety/fire mode selector is double-sided, while the
charging handle can be easily put from one side to the other in a manner of
seconds, which makes the replica comfortable and easy to use also by left-handed
users. The stock features an anti-slip stock pad and can be put to the side
of the receiver. It also features 3 settings of length adjustment. In
order to gain access to the Hop-Up chamber, it is necessary to pull back the
charging handle and lock it in the rear position. A noteworthy detail is an operational
bolt-catch mechanism.
HPA Edition is equipped with an HPA Inferno Gen.2 motor
made by an American company - Wolverine, designed especially for the
needs of Scorpion EVO. It allows adjusting the rate of fire of a replica
in a range of 15 - 30 BBs per second. It is also possible to program a burst
mode, by specifying the number of BBs - from 2 to 7 - in a series.
HPA version, similarly to an AEG replica, features a realistic
system that stops the replica’s operation after the last BB has been fired
- in order to continue firing, it is necessary to insert a full magazine and
release the bolt-catch mechanism.
Furthermore, the replica features a precision internal
barrel with a diameter of 6.03 mm.
The set includes a polymer Low-Cap with a capacity of up
to 75 BBs.
ATTENTION! The set does not include an HPA regulator
or tank that are necessary for operation.
The set includes:
- replica
- magazine
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).