SVD Sniper Rifle Replica (Wood version)
- Made of: Steel + wood
- Length: 1225mm
- Weight: 3740g
- Muzzle Velocity: ~430 FPS
- Manufacturer: LCT
SVD Sniper Rifle Replica (Wood version)
The newest replica of the iconic SVD sniper rifle manufactured by LCT. It was made of steel and wood. The receiver, the outer barrel, the gas block, the flash hider, the sights, the front grip fittings, the magazine and all of the small elements are made out of steel. The front grip and the stock are made of wood. Only the bolt dummy is made of aluminum.
The whole construction is of the highest of quality. The replica's receiver is additionally processed on CNC machines from one block of steel. And the dust cover is made out of pressed steel. The coverage, however, is equally dark gray and matt everywhere.
The heart of the replica is a gearbox modeled on the one known from RS or CM replicas - with four gears mounted on ball bearings, an extended cylinder and a piston. The replica has been additionally fitted with a quick spring replacement system, which we can access after removing the dust cover. Thanks to these solutions, the replica generates approximately 430 FPS. The replica is powered by a Slim High Torque motor.
Inside, there is also an inner barrel 700 mm long, embedded in a rotary Hop Up chamber.
The low-cap magazine the comes with the replica holds 55 BBs.
Under the front covers there is a place for a battery with a Small Tamiya plug. The recommended battery is LiPo 11.1V 20C.
The set does not include a battery or a charger.
Set contains:
- replica
- magazine
- catalog + reference to the user manual
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).